Uv Sanitizing Function; Uv 除菌功能 - Kohler C3-400 Homeowner's Manual

USE GUIDE / 使用指导
UV SANITIZING FUNCTION / UV 除菌功能
(except for K-26134T-0/K-26134T-HC-0) /
（K-26134T-0/K-26134T-HC-0 无该功能）
When the unit is not under seat-on status, if not used for a long time, UV
sanitizing function will be auto activated to sanitize the wand. It will take
about 45 min. This function will not be activated again in 24 hours after
sanitizing finishes.
非落座时，如果长时间无人使用，将自动启动 UV 除菌功能，对喷管进行
除菌。该过程的时间约为 45 分钟。除菌结束后 24 小时之内不会再次启动
该功能。
UV irradiation area
UV 照射范围
* UV sanitizing (means sanitizing with ultraviolet light from a UV lamp): The UV lamp sanitizes
the nozzle surface by irradiation during its operating period. The bacteria removal rate is more
than 99% (Tested per GB/T 23131 in an irradiation area of 24mm×8mm after a UV operation
period. The UV irradiation area is as shown in the diagram. To set the UV operation period,
please refer to the operating instructions. Test organization: China Testing and Inspection
Institute for Household Electrical Appliances (CTIHEA))
* UV 除菌（是指 UV 灯产生紫外线除菌）：在 UV 工作周期内通过照射对喷嘴表面进行除细菌。
除菌率大于 99%（在 UV 的一个工作周期后于 24mm×8mm 的照射区域内依据 GB/T 23131 进行
试验， UV 照射区域见示意图， UV 工作周期开启方式见操作说明。 测试机构：中国家用电器检测所）
1349982-T01-A
Nozzle
喷嘴
14 Kohler Co.