Highlight Play - Sony HAR-D1000 Operating Instructions Manual

Locating a desired album or track
(continued)
By pressing the DISPLAY button, you can
check more information about the current item.
Each time you press the button, the lower part
of the display changes as follows:
Album or track name t Album (and track)
number
Tips
• When you press the SEARCH/CHAR button (or the
SEARCH button on the remote) while the current
item is displayed, the display for entering a
keyword appears again. This allows you to do
another search with another keyword under the
same condition as the previous keyword.
• In step 5, you can register the track to a play list by
pressing the PLAY LIST button on the remote. (see
"Playing a track in a play list" on page 20).
Searching by playback

(Highlight Play)

This function allows you to easily locate an
album on the HDD by playing back a part of a
representative track in each album.
To register a representative track
for Highlight Play
1
While the recorder is playing or paused
in Normal Play, press HIGH-LIGHT on
the remote.
Rehearsal playback starts from the point
where you pressed the button.
2
While monitoring the sound, turn
ALBUM dial (or press ALBUM +/– on
the remote repeatedly) to adjust the
starting point of Highlight Play.
You can shift the starting point in 1-frame
(f) intervals (1 frame = 1/43 second).
The time indication (minute, second and
frame) of the current point is displayed
To find a point quickly
Specify the unit (minute, second or frame)
by pressing the HDD l/L buttons
repeatedly. The selected unit flashes in the
display.
22
3
Press ALBUM dial or YES.
"Complete!" appears in the display and the
Highlight position of the representative
track in the album is registered for
Highlight Play.
The Highlight position plays for 10 seconds.
Notes
• If the registration of the Highlight position has not
been performed, the beginning of the first track in
the album becomes the Highlight position of the
album.
• Only one track can be selected as the representative
track for each album.
The Highlight position can be registered for any of
the tracks. However, if you register more than two
Highlight positions in the same album, the last track
with the Highlight position registered becomes the
representative track for that album.
• During Highlight Play, you cannot:
– register a Highlight position
– register a track to a play list
• You cannot register a Highlight position to a play
list (album numbers 501 to 510).
To play an album found through
Highlight Play
1
While the recorder is stopped, press
HIGH-LIGHT on the remote.
Highlight Play starts and HDD's H flashes
in the display.
2
While monitoring the sound, turn
ALBUM dial (or press ALBUM +/– on
the remote repeatedly) to locate the
desired album.
3
Press HDD H.
Playback starts from the first track in the
selected album.
Note
If you perform Highlight Play when Shuffle Play is
selected, the HDD play mode automatically switches
to Normal Play.