Playing A Track In A Play List; Play List Play - Sony HAR-D1000 Operating Instructions Manual

Using the HDD display (continued)
During normal playback
Press TIME on the remote repeatedly.
Each time you press the button, the display
changes as follows:
Current track number and elapsed playing time
of the track t Current track number and
remaining time of the track t Remaining time
of the entire album (Normal Play only)
Tip
When you press the INFO button on the remote, the
display changes to the album number of the album
containing the current track. If you press the button
while the album number is displayed, the display
changes to the artist name for the current track.
Note
"- - - - . - -" appears when the remaining time of the
album exceeds 1,000 minutes.
During recording
Press TIME on the remote.
Each time you press the button, the display
changes as follows:
Track number and elapsed recording time of
the current track t Percentage of the HDD
area used as a total recorded time
Notes
• The total recorded time is first displayed as a
percentage. When the remaining recordable time
reaches "999 . 59" (999 minutes and 59 seconds),
the display changes to a time display.
• The percentage of the HDD area used will never be
0% even when no tracks have been recorded to the
HDD.
20
Playing a track in a play
list
–– Play List Play
By registering tracks on the HDD to a play list,
you can play back only the tracks you want to
listen to. Up to 10 play lists can be created and
each play list can contain up to 400 tracks. On
this recorder, album numbers 501 to 510
correspond to the play lists.
When using the remote, set SELECT to HDD.
1
During the playback or play pause of
the desired track, press PLAY LIST on
the remote.
2
Turn ALBUM dial (or press ALBUM +/–
on the remote repeatedly) until the
desired play list appears, then press
YES.
"Complete!" appears for a few seconds.
3
Do the procedure of "Playing the HDD"
on page 18 to play the play list.
Tip
When you press the PLAY LIST button on the remote
while the recorder is stopped, all the tracks in the
current album are registered to a play list.
Notes
• If you edit a track in an album that is registered to
one or more play lists, the track is erased from all
the play lists automatically. (except for the Name
function)
• During the playback of a track in a play list, you
cannot press the PLAY LIST button on the remote
to register the track to a play list.