Sony HAR-D1000 Operating Instructions Manual page 16

Recording tips (continued)
3
Turn ALBUM dial (or press ALBUM +/–
on the remote repeatedly) until
"LS(T) –XXdB" appears in the display,
then press ALBUM dial or YES.
4
Turn ALBUM dial (or press ALBUM +/–
on the remote repeatedly) to select the
level, then press ALBUM dial or YES.
You can set the level at any value between
–72 dB and 0 dB, in 2 dB increments
(–50 dB is the factory setting).
5
Press MENU/NO.
Tips for Level Synchro Recording
• When recording from a CD player or an MD deck
connected to the DIGITAL OPTICAL IN
connector, the entire material might be recorded as
a single track in the following cases:
– When you consecutively record the same track
two or more times using single-track repeat play.
– When you consecutively record two or more
tracks with the same track number but from
different CDs or MDs.
– When you record tracks from certain CD or
multi-disc players.
• When recording from a component connected to the
ANALOG IN jacks with "T.Mark Off" selected or
when recording from a DAT deck or DBS tuner
connected to the DIGITAL OPTICAL IN
connector, the entire material may be recorded as a
single track.
Tips
• You can mark track numbers even after recording
has finished. (see "Dividing Recorded Tracks" on
page 24)
• To restore the factory setting, press CLEAR while
setting the trigger level in step 4.
Notes
• If this function is activated when the 400th track is
reached, recording stop.
• When recording from a CD, a track number might
not be marked for tracks less than 4 seconds in
length.
16
Erasing blank portions
automatically
(Smart Space/Auto Cut)
The Smart Space function lets you make the
blank spaces between tracks 3 second long
automatically. If the Smart Space function is
on and there is no sound input for about 3
seconds or more (but less than 30 seconds)
during recording, the recorder replaces this
silence with a blank of about 3 seconds and
continues recording:
No sound input for less than 30 seconds
Off
On
Replaced with a blank of 3 seconds and
recording continues
Auto Cut: When the Smart Space function is
on, if there is no sound input for 30 seconds or
more, the recorder replaces this silence with a
blank of about 3 seconds and enters recording
pause.
No sound input for 30 seconds or more
Off
On
Replaced with a blank of 3 seconds and
recording pauses
1
While the recorder is stopped or
recording pause, press MENU/NO.
"Edit Menu" appears in the display.
2
Turn ALBUM dial (or press ALBUM +/–
on the remote repeatedly) until
"Setup?" flashes in the display, then
press ALBUM dial or YES.
"Setup Menu" appears in the display.