Playing From The Beginning Of The Programme You Are Recording (Chase Play); Playing Repeatedly (Repeat) - Sony SVR-HDT1000 Operating Instructions Manual

Playing from the beginning of
the programme you are
recording (Chase Play)
Chase Play allows you to view the recorded
part of a programme while the recording is
being made. You do not need to wait until
the recording finishes.
Press TITLE LIST and select the title
which is being recorded, and press N.
Playback starts from the beginning of the
programme you are recording.
z
You can also play a previously recorded
programme while recording programmes
(Simultaneous Rec and Play).

Playing repeatedly (Repeat)

You can repeatedly play a single title or
selected titles on the HDD.
1
Press TITLE LIST.
2
Select a title using M/m, and press
the green button ("Select").
To play multiple titles repeatedly, select
two or more titles.
3
Press to play the selected title(s).
4
Press REPEAT.
Repeat playback of the selected title(s)
starts.
Repeat mode changes by pressing
REPEAT.
: Repeats a single title.
: Repeats the selected titles.
To cancel repeat play
Press REPEAT again.
24
To play a specific portion repeatedly
(Repeat A-B)
1
Press OPTIONS to select "Playback"
and then "Repeat A-B" during playback.
2
Press at the starting point (point A)
of the portion to be played repeatedly.
3
Press OPTIONS to select "Playback"
and then "Repeat A-B."
4
Continue playing to locate the ending
point (point B) and press
Repeat A-B play starts.
To cancel Repeat A-B play, press
OPTIONS to select "Playback" and then
"Repeat A-B," and press
z
"Repeat A-B" can be set only within the same
title.
b
• Repeat play cannot be set during recording.
• When recording starts during repeat play, repeat
play will be cancelled.
.
.