Preparing The Windows Tcp/Ip Function - Canon W7200 Setup Manual

Preparing the Windows TCP/IP Function

Before installing the printer driver, confirm that the functions required by the
operating system have been installed. If they have not been installed, install
the required functions from the operating system CD-ROM.
Windows XP, Windows 2000
The operating system software required to connect to a TCP/IP network has
already been installed. Just install printer driver now. (Æ P.3-8)
Windows Me, Windows 98
The operating system software required to connect to a TCP/IP network is
installed when the printer driver is installed. Just install the printer driver
now. (Æ P.3-8)
Windows NT 4.0
The operating system software required to connect to a TCP/IP network is
not provided with the standard installation. To confirm whether the required
software has been installed, on the desktop click the Start button, click
Control Panel, open Network, then check the list on the Service sheet. If
"Microsoft TCP/IP Printing" is listed, just install the printer driver now.
(Æ P.3-8)
If "Microsoft TCP/IP Printing" is not listed, click the Add button. Under
Network Services, select "Microsoft TCP/IP Printing" then install it from the
operating system CD-ROM.
Installing a Windows TCP/IP Network Connection
3-3