Canon W7200 Setup Manual page 100

3
4
Note
3-30
Installing the Software
Select the "GARO Printer Driver" icon in the list on the left, then in the
right list under Destination select the name of the selected printer.
If the printer is not displayed in the list, check the printer cable connection
and make sure that it is secure.
Close the Chooser window, then the confirmation message opens,
click the OK button.
This completes the printer selection.
z After selecting any other printer with the Chooser, you must do Step 2 to 4 in order
to switch to this printer so you can use it again.