Installing The Output Stacker - Canon W7200 Setup Manual

Installing the Output Stacker

1
2
1-14
Setting Up the Printer
The output stacker is installed on the printer stand when the optional media
take-up unit is not installed.
To confirm the front and back end of the output stacker, spread the
output stacker so the end with the larger area (a) is at the front and
the end with the smaller area (b) is at the back.
The side of the output stacker cloth with the fold is the back side.
a
Insert the arms of the back end (smaller portion) into the support
brackets for the output stacker on the left and right side. Insert the
arms completely into the grooves so the arms are level.
b