Canon W7200 Setup Manual page 69

10
Press .
S u b n e t M a s k
0 . 0 .
The mark displayed at the left, marks the number to change, one by one.
11
To enter the subnet mask used by the network, press
the number to change, then press Enter.
Press to increase the number by 1. When pressed beyond 255, returns to 0.
Press to decrease the number by 1. When pressed beyond 0, jumps to 255.
S u b n e t M a s k
2 5 5 . 0 .
The number is temporarily saved, and the next number is ready to be
changed.
12
Repeat Step 11 until the subnet mask allocated for the printer is
completed.
When the entry is finished, the display returns to subnet mask entry standby.
Now enter the default gateway.
13
Press once then press
.
I P S e t t i n g
D e f a u l t G / W
14
Press .
D e f a u l t G / W
0 . 0 .
The mark displayed at the left, marks the number to change, one by one.
0 . 0
0 . 0
or to select "Default G/W", then press
0 . 0
Doing the Settings on the Printer Operation Panel
or to select
2-11