Stihl MS 231 Manual page 71

1
– Take out the screws (1).
: Ease the handlebar (2) sideways
and take it out of the guide
(arrow).
1 1
: Remove the screws (1) from the
underside of the machine and lift
the handlebar (2) out of its
seat (arrow).
1
: Push the handlebar (1) out of the
lower guide.
– Remove the handlebar (1), check
it and replace if necessary.
70
All manuals and user guides at all-guides.com
– Inspect the AV spring and
replace if necessary, b 9.3
2
Installing
1
– Place the handlebar in position.
2
2
: Lift the handlebar (1), lug (2) first,
into the recess (arrow) until it
locates in the tank housing seat.
– Insert the screws and tighten
them down firmly.
: Ease the handlebar (1) sideways
and place it in the guide (arrow).
– Insert the screws and tighten
them down firmly.
1
1
: Place plug (1) of AV spring on the
cylinder.
: Insert and tighten down the
screw (2) firmly.
– Reassemble all other parts in the
reverse sequence.
1
MS 231, MS 231 C, MS 251, MS 251 C
2