Stihl MS 231 Manual page 26

1
3
: Fit the strap (1) on the pivot
pins (2) and (3) so that "TOP"
faces outwards and the
curve (arrow) faces up.
2
: Slip the spacer washer (1) onto
the pin (2).
1
2
: Hold the brake lever (2) so that
the brake spring attachment
point (arrow) is at the top.
MS 231, MS 231 C, MS 251, MS 251 C
All manuals and user guides at all-guides.com
: Push the brake lever (2) into the
recess in the hand guard (1) and
line up the holes.
2
: Fit the brake cable (1) in the
hole (arrow).
1
1
: Push the hand guard (1) with
brake lever (2) over the machine
until they are positioned against
the pivot pins (arrows).
1
1
: Lift the bearing boss of the hand
guard (1) and the brake lever (2)
a little and position them over the
pivot pins (arrows).
2
1
: Push the flat spring (1) slightly to
one side until the cam of the hand
guard (arrow) slips passed it.
– Push the hand guard bearing
boss and the brake lever on to
the pivot pins.
: Push the brake cable
grommet (1) into its seat (arrow)
as far as stop.
2
1
25