Operating The System - Philips FW-V55 Manual

All manuals and user guides at all-guides.com
VCD MINI HIFI SYSTEM
PROGRAM SHUFFLE
REPEAT REC
NEWS T.A. AM MW FM LW
60Hz 250Hz 500Hz 1KHz
STANDBY
ON
CLOCK/ MP3•CD
TIMER CD1 • 2 • 3 BAND
VCD TUNER
PROG
SEARCH • TUNING STOP•CLEAR PLAY PAUSE
MP3-CD
- ALBUM +
SOUND NAVIGATION
INCREDIBLE
SURROUND
DIGITAL
SOUND CONTROL
Important:
Before you operate the system,
complete the preparation
procedures.
Demonstration mode
The system has a demonstration mode
that shows the various features offered
by the system. When the system is
switched on for the first time, the
demonstration mode will start
automatically.
Notes:
– During the demonstration, if you press
any source (or standby-on) button, the
system will switch to the respective
mode (or standby).
– When the system is switched to
standby mode, the demonstration will
resume 5 seconds later.
pg 01-28/V55/21-En 11
To start the demonstration mode
• Press and hold Ç (on the system only)
for 5 seconds when the system is in
STEREO
BACK
FRONT HSD
2KHz 4KHz 8KHz standby mode.
PBC ™ The demonstration will begin.
RETURN
TAPE 1 • 2 CDR/VIDEO
Easy Set
TAPE AUX
A. REV
PRESET EASY SET allows you to store all available
PREV SIDE NEXT
radio stations automatically.
MIC
LEVEL
- TITLE +
• Press and hold STANDBY ON (on the
DYNAMIC BASS
MIC
BOOST
system only) for 5 seconds ; when the
system is in standby or demonstration
mode.
™ "EASY SET" will be displayed,
To stop the demonstration mode
• Press and hold Ç (on the system only)
™ EASY SET will start searching for all
for 5 seconds when the system is in
demonstration mode.
™ The demonstration will stop.
™ All available radio stations with
™ "DEMO OFF" is displayed.
™ The system will switch to standby
mode.
Notes:
– When the system is switched on from Notes:
the main power outlet, the CD carousel – EASY SET will start with the FM band, if
tray may open and close again to there are still presets available, the
initialize the set. system will continue to store the MW
– Even though the AC power cord is band.
removed from and reconnected to the – When EASY SET is used, all previously
wall socket, the demonstration will stored radio stations will be replaced.
remain off until it is switched on again. – The last preset radio station will appear
on the display when EASY SET is
completed.

OPERATING THE SYSTEM

Switching the system ON
• Press VCD, TUNER, TAPE or AUX.
You can also switch on the system by
pressing any one of the DISC DIRECT PLAY
buttons.
Switching the system to
standby mode
• Press STANDBY ON or B on the
remote control.
™ The system will switch to standby
mode.
and followed by "TUNER" and then Selecting the Source
"AUTO".
• Press the respective source selection
button: VCD, TUNER, TAPE or AUX.
radio on FM band and then followed
™ The display indicates the selected
by radio stations on MW band.
source.
Note:
sufficient signal strength will be
– For an external source, make sure you
stored. Up to 40 presets may be
have connected the audio left and right
stored.
OUT terminals of the external
equipment (TV, VCR, Laser Disc player,
DVD player or CD Recorder) to the AUX/
CDR IN terminals.
6/8/01, 9:11 AM
11
3139 115 20042