Operating The System - Philips FW-C28 Manual

All manuals and user guides at all-guides.com

OPERATING THE SYSTEM

FW- C10 MINI HIFI SYSTEM
STANDBY-ON
CD1 • 2 • 3 BAND
CD TUNER
TUNING
SEARCH STOP• CLEAR
DIGITAL
DSC
SOUND
CONTROL PROGRAM RECORD DUBBING A.REPLAY
DIGITAL SOUND CONTROL
Important:
Before you operate the system,
complete the preparation procedures.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the
system. When the system is switched
on for the first time, the demonstration
mode will start automatically.
Notes:
– During the demonstration, if you press
any source (or standby-on) button, the
system will switch to the respective
mode (or standby).
– When the system is switched to standby
mode, the demonstration will resume 5
seconds later.
10
pg 01-24/C28/22-Eng 10
Easy Set
EASY SET allows you to store all available
radio stations and RDS stations
automatically.
TAPE 1 • 2 VIDEO 1 Press and hold STANDBY ON (on the
TAPE AUX
system only) for 5 seconds ; when the
PRESET
system is in standby or demonstration
mode.
PLAY• PAUSE PREV NEXT
™ "EASY SET" will be displayed, and
DIM
•
RDS NEWS CLOCK TIMER
VOLUME
™ EASY SET will start searching for all
To stop the demonstration mode
• Press and hold Ç (on the system only)
for 5 seconds when the system is in
demonstration mode.
™ The demonstration will stop.
™ All available RDS and radio stations
™ "DEMO OFF" is displayed.
™ The system will switch to standby
mode.
2 The system will proceed to set the RDS
Note:
time automatically with the stored RDS
– Even though the AC power cord is
preset station.
removed from and reconnected to the
• If no RDS station is available in the first
wall socket, the demonstration will
preset station, the program will exit
remain off until it is switched on again.
automatically.
™ After a radio station is found, "EASY
To start the demonstration mode
• Press and hold Ç (on the system only)
for 5 seconds when the system is in
standby mode.
™ The demonstration will begin.
• When searching RDS time;
™ "SEARCH RDS TIME" will be
displayed.
™ When RDS time is read, "RDS
TIME" will be displayed. The current
time will be displayed for 2 seconds
and stored automatically.
Notes:
– EASY SET will start with the RDS
station, if there are still presets
followed by "TUNER" and then
available, it will continue to store the
"AUTO".
FM, MW and LW bands respectively.
– When EASY SET is used, all previously
RDS radio stations with sufficient
stored radio stations will be replaced.
signal strength and then followed by
– The last preset radio station or the first
radio stations on FM, MW and LW
available RDS station will appear on the
band respectively. Weak RDS radio
display when EASY SET is completed.
stations may be stored in later
– If RDS station does not transmit RDS
presets.
time within 90 seconds, the program
will exit automatically and the display
with sufficient signal strength will be
will show " NO RDS TIME ".
stored. Up to 40 presets may be
stored.
Switching the system ON
• Press CD, TUNER, TAPE or AUX.
You can also switch on the system by
pressing any one of the CD DIRECT PLAY
buttons.
SET" will be displayed and followed
by "TIME"
3/7/00, 5:14 PM
3139 116 19331