Philips FW-V55 Manual page 15

All manuals and user guides at all-guides.com
Searching for a particular
passage during playback
• Press à or á to select 4 different
search speed.
™ "FRX1" ; "FRX2" ; "FRX3" or
"FRX4" is displayed on the TV
screen when you select a fast rewind
search.
™ "FFX1" ; "FFX2" ; "FFX3" or
"FFX4" is displayed on the TV
screen when you select a fast
forward search.
™ Normal playback will begin at the
end of the fast rewinding or
forwarding of the selected track.
• Play returns to normal when PLAYÉ Å
is pressed or when a new track is
selected.
pg 01-28/V55/21-En 15
6 Press Ç once to end programming.
Programming Tracks
™ The total number of tracks
Programming tracks of a loaded disc is
possible when playback is stopped. The
display will indicate the total tracks stored
Notes:
in the program. Up to 99 tracks can be
– For MP3-CD, total playing time will not
stored in the memory in any order (except
be shown.
for MP3-CD) . When 99 tracks are stored
– If the total playing time is more than
and you attempt to store another track, the
" 99:59 " then " --:-- " appears on
display will show "FULL".
the display instead of the total playing
Note:
time.
– Program cannot be used for VCDs when
– If the system is reading the disc,
PBC is switched on. Switch off PBC
programming is not possible,
before storing tracks from such a VCD.
" READING DISC " will be
displayed.
1 Load the desired discs in the disc trays.
– During programming, if no button is
2 Press the VCD (CD 1•2•3) button to
pressed within 20 seconds, the system
select the disc tray.
will exit program mode automatically.
™ Programming can only be done on the
selected disc.
Reviewing the program
3 Press PROG to start programming.
™ The starts flashing. Reviewing of program is possible only
PROGRAM
™ It will cancel any previously when playback is stopped.
1 Press í or ë repeatedly to review
programmed tracks and selected
repeat mode. the programmed tracks.
4 Pressí or ë (or digit 0-9 on the 2 Press Ç to exit review mode.
remote control) to select the desired
track.
- - + +
• For MP3-CD, press ALBUM - - - /+ + +
and TITLE - - - /+ - - + + to select the + +
desired Album and Title for
programming.
5 Press PROG to store the track.
• Repeat steps 4 to 5 to store other
tracks.
Playing the program
1 Press PLAY É Å to start program
programmed and total playing time
playback.
appear on the display.
™ "PLAY PROGRAM" will be
displayed.
™ The track number and elapsed
playing time of the current track will
appear on the display.
• If you press REPEAT during program
playback, all programmed tracks will be
played repeatedly.
™ "PROGRAM" or "OFF" will be
displayed.
™ The
the display.
2 Press Ç to stop program playback.
Note:
– If you press any other DISC DIRECT
PLAY buttons, the system will play the
selected disc or track and the stored
program will be cleared.
6/8/01, 9:11 AM
CD / VCD / MP3-CD
and appear on
REPEAT PROGRAM
15
3139 115 20042