Clock - Philips FW-V55 Manual

All manuals and user guides at all-guides.com
RECORDING
VCD/CD/MP3-CD Synchro Start
Recording
1 Load a blank tape into tape deck 2 and a
disc into a disc tray.
2 Press VCD to select VCD/CD/MP3-CD
mode.
• You can program the tracks in the order
you want them to be recorded (see
Programming Tracks). If not, select the
disc by pressing VCD (CD 1•2•3) and
the tracks are recorded according to the
order on the selected disc.
3 Press REC to start recording.
™ The starts flashing.
REC
• Disc will start playback automatically.
4 Press Ç to stop recording.
Recording the mixed sound /
One Touch Recording
• During microphone mixing, you can
record the mixed sound on a tape in
tape deck 2 except dubbing mode.
• For One Touch Recording, as soon as you
press REC, the current source (VCD,
TUNER or AUX) will be recorded on tape
deck 2.
1 Load a blank tape in tape deck 2.
2 Press REC to start recording.
™ The starts flashing.
REC
3 Press Ç to stop recording.
24
pg 01-28/V55/21-En 24

CLOCK

Note:
– When you press RECORD while in TAPE
mode, " SELECT SOURCE " will be
displayed. One Touch Recording is not
possible in TAPE mode.
View Clock
You can view the clock (if it is set) if the
system is in Standby mode or when any
sound source is selected (CD, TUNER, etc.).
The clock will be displayed for about 7
seconds.
• Press CLOCK/TIMER briefly.
™ "PM 10:38 or 22:38" (the
™ "--: : : : : --" will be displayed if the
VCD MINI HIFI SYSTEM
PROGRAM SHUFFLE STEREO
BACK
REPEAT TIMER REC
NEWS T.A. AM MW FM LW FRONT
60Hz 250Hz 500Hz 2KHz 4KHz 8KHz
1KHz
STANDBY
ON
CLOCK/ MP3•CD
TIMER CD1 • 2 • 3 BAND TAPE 1 • 2 CDR/VIDEO
VCD TUNER TAPE AUX
PROG
PRESET
SEARCH • TUNING STOP•CLEAR PLAY PAUSE PREV SIDE
- MP3-CD -
ALBUM + TITLE
SOUND NAVIGATION
INCREDIBLE DYNAMIC BASS
BOOST
SURROUND
DIGITAL
SOUND CONTROL
Clock Setting
The clock can be set in either 12- or 24-
hour mode, e.g. "AM 12:00" or
"00:00". Before setting the clock, you
must be in the View Clock mode.
1 Press CLOCK/TIMER to select clock
mode.
2 Press PROG (on the system only) to
current time) will be displayed select 12- and 24- hour mode.
depending on whether you have ™ If 12-hour mode is selected,
selected 12- or 24-hour mode. "AM 12:00" starts flashing.
™ If 24-hour mode is selected,
clock is not set. "00:00" starts flashing.
3 Set the hour with à or á on the
system.
4 Set the minute with í or ë on the
system.
6/8/01, 9:12 AM
HSD
PBC
RETURN
A. REV
NEXT
MIC
LEVEL
+
MIC
3139 115 20042