Philips FW-V55 Manual page 7

All manuals and user guides at all-guides.com
CAUTION:
– For optimal sound performance, it is
recommended to use the supplied
speakers.
– Do not connect more than one speaker
to any one pair of + / - speaker
terminal.
– Do not connect speakers with
impedance lower than the speakers
supplied. Please refer to
SPECIFICATION section of this manual.
D Rear Surround Speakers'
Connection
Connect the optional Rear Surround
Speakers to the REAR SURROUND
terminals. Be sure to follow the
instructions supplied with the Rear
Surround Speakers.
E Line Out Connection
(wireless
ready)
You can connect the audio left and right
LINE OUT terminals to a optional CD
Recorder ANALOG IN terminals. This
allows you to record in an analog format.
You can also install additional optional
front active speakers away from the
system (e.g. in another room) to reduce the
inconvenience of running long speaker
wires across rooms. You can place as many
remote speakers as you like provided they
operate at the same radio frequency.
pg 01-28/V55/21-En 7
Connect the wireless radio frequency
H Video Out Connection
transmitter to the LINE OUT terminals.
Connect the VIDEO OUT terminal at the
Place the active speakers at your preferred
rear of the system to the TV or VCR VIDEO
location. Be sure to follow the instructions
IN for viewing or recording.
supplied with the active speakers.
Note:
I Adjusting the Operating
– Availability of wireless transmitter and
its peripherals are subjected to the
approval of local authorities. Please
Before connecting the AC power cord to
check with respective local safety or
the wall outlet, make sure that the voltage
approving authority.
selector at the rear of the system is set to
the local power line voltage. If not, reset
F Connecting other
the selector before connecting to the wall
equipment to your system
outlet.
You can connect the audio left and right
OUT terminals of a TV, VCR, Laser Disc
J AC Power Supply
player, DVD player or CD Recorder to the
After all other connections have been
AUX/CDR IN terminals at the rear of the
made, connect the AC power cord to the
system.
system and to the wall outlet.
G Subwoofer Out Connection
Connect the optional active subwoofer to
the SUBWOOFER OUT terminal. The
subwoofer reproduces just the low bass
sound effect (e.g. explosions, the rumble of
spaceships, etc.). Be sure to follow the
instructions supplied with the subwoofer.
Inserting batteries into the
Remote Control
• Insert the batteries (Type R06 or AA)
into the remote control as shown in the
battery compartment.
Voltage
(for specific version only))
• To avoid damage from possible battery
leakage, remove dead batteries or
batteries that will not be used for a long
time. For replacement, use type R06 or
AA batteries.
6/8/01, 9:11 AM
PREPARATION
7
3139 115 20042