Philips FW-V55 Manual page 14

All manuals and user guides at all-guides.com
CD / VCD / MP3-CD
Discs for playback
This system can playback all audio CD,
finalized audio CD-Recorder and MP3-CD
format discs.
Note:
– For mixed mode discs, only one mode
will be selected for playback depending
on the recording format.
Loading the Disc Changer
1 Press VCD to select VCD/CD/MP3-CD
mode.
2 Press OPEN•CLOSE.
™ The disc carousel tray slides out.
3 Load a disc with the printed side up in
the right tray.
• You can load another disc in the left
tray.
• To load the third disc, press the DISC
CHANGE button.
™ The disc carousel tray will rotate
until the empty tray is ready for
loading.
™ Playback will always start with the
disc in the inner disc tray.
4 Press OPEN•CLOSE to close the disc
carousel tray.
™ The total number of tracks and the
playing time of the last selected disc
appear on the display.
14
pg 01-28/V55/21-En 14
For MP3-CD only: Note:
™ The first Album and the first Title – During Disc Reading mode, if you press
information appear on the display. any button, " PLEASE WAIT " will
be displayed.
Notes:
– To ensure good system performance,
Disc Change
wait until the disc changer completely
reads the disc(s) before proceeding.
You can change the outer two discs while
– For MP3-CD, the disc reading time may
the third inner disc is stopped or is playing.
exceed 10 seconds due to the large
1 Press DISC CHANGE.
number of songs compiled into one disc.
™ The disc carousel tray slides out.
2 Replace the discs in the left and right
Disc Direct Play
disc trays.
You can play a disc directly by pressing the • If you press DISC CHANGE again
DISC 1, DISC 2 or DISC 3 button. during playback, the disc will stop
playing.
™ The disc carousel tray will rotate
Playing a normal disc
For normal VCD:
Ensure that the system is switched to
3 Press OPEN•CLOSE to close the disc
the corresponding PAL or NTSC
carousel tray.
system of your TV set (except multi-
system TV).
Selecting a desired track
1 Press PLAYÉ Å to start playback.
Selecting a desired track when
™ The disc tray, track number and
playback is stopped
elapsed playing time of the current
• Press digit 0 – 9 on the remote control
track appear on the display.
to select the desired track.
• To interrupt playback, press PAUSE
™ Playback will start immediately for
É Å .
™ The playing time flashes.
™ The selected track number and
• To resume playback, press PLAYÉ Å
again.
2 To stop playback, press Ç.
Selecting a desired track during
playback
• Press í or ë (or digit 0-9 on the
remote control) until the desired track
appears on the display.
™ The selected track number and
elapsed playing time appear on the
display.
• If you press í once it will skip to the
beginning of the previous track and play
the track.
For MP3-CD only
1 Press ALBUM -
the desired Album appears on the
display (when playback is stopped) .
2 Press TITLE -
until the inner tray is rotated out and the desired Title appears on the display.
is ready for changing. ™ The selected track number and
elapsed playing time appear on the
display.
3 Press PLAYÉ Å to start playback.
the selected track.
elapsed playing time appear on the
display.
6/8/01, 9:11 AM
- - - /+ - + + + + ( à or á ) until
- - /+ - - + ( í or ë ) until + + +
3139 115 20042