Operating The System - Philips FW-D5 Manual

All manuals and user guides at all-guides.com
DVD MINI HIFI SYSTEM
STANDBY
ON
FTS FTS TITLE CHAP. CHAP. FM LW A M W SLEEP DIM
P1 P2 P3 P4
POWER SAVE
IR SENSOR
VCD • CD CD 1 • 2 • 3
DVD CD
SEARCH•TUNING STOP•CLEAR PLAY PAUSE
CLOCK/
PROG DIM
TIMER
DVD
DVD
AXIS OK
MENU
DVD JOG
Important:
Before you operate the system,
complete the preparation
procedures.
Demonstration mode
The system has a demonstration mode
that shows the various features offered
by the system. When the system is
switched on for the first time, the
demonstration mode will start
automatically.
Notes:
– During the demonstration, if you press
any source (or standby-on) button, the
system will switch to the respective
mode (or standby).
pg 01-43/D5/37-Eng 15
Notes:
– When the system is switched on from
NEWS / T.A.
the main power outlet, the CD carousel
LEFT CENTER RIGHT
TIMER
tray may open and close again to
P5 P6
SURR CHANNEL SURR
initialize the set.
RDS / CD TEXT
SURROUND CONTROL
– Even though the AC power cord is
5.1CH / STEREO / SURR / 3D
FM•AM CDR
removed from and reconnected to the
TUNER AUX
wall socket, the demonstration will
PRESET
PREV SIDE NEXT
remain off until it is switched on again.
VOLUME
To start the demonstration mode
• Press and hold Ç(on the system
only) for five seconds when the
SOUND JOG
system is in standby mode.
™ The demonstration will begin.
– When the system is switched to standby
Easy Set
or power save mode, the demonstration
will resume five seconds later.
EASY SET allows you to store all
available radio stations automatically.
To stop the demonstration mode
• Press and hold STANDBY ON (on
• Press and hold Ç(on the system
the system only) for five seconds
only) for five seconds when the
when the system is in standby or
system is in demonstration mode.
demonstration mode.
™ The demonstration will stop.
™ "EASY SET" will be displayed, and
™ "DEMO OFF" will be displayed.
™ The system will switch to standby
mode.
™ EASY SET will search for all radio
™ All available radio stations with

OPERATING THE SYSTEM

Notes:
– EASY SET will start with the FM band,
if there are still presets available, the
system will continue to store the AM
band.
– When EASY SET is used, all previously
stored radio stations will be replaced.
– The last preset radio station will
appear on the display when EASY SET
is completed.
Switching the system ON
• Press DVD, CD, TUNER or AUX.
You can also switch on the system by
pressing any one of the CD DIRECT
PLAY buttons.
Switching the system to
standby mode
• Press STANDBY ON or B on
the remote control.
™ The system will switch to standby
mode.
followed by "TUNER" and then
"AUTO".
stations on FM band and then
search for radio stations on AM
band.
sufficient signal strength will be
stored. Up to 40 presets may be
stored.
7/13/00, 11:50 AM
15
3139 116 19774