Philips FW-V55 Manual page 16

All manuals and user guides at all-guides.com
CD / VCD / MP3-CD
Erasing the program
(when
playback is stopped)
• Press Ç.
™ "PROGRAM CLEARED" will be
displayed.
Note:
– The program will be erased when the
system is disconnected from the power
supply. The system is switched to
standby mode when you change source
or when you change the program disc.
Repeat
(only on remote control)
You can play the current track or the
current disc repeatedly during playback.
1 Press REPEAT on the remote control to
select the various repeat modes.
™ "TRACK", "DISC"or "OFF" will
be displayed.
™ The appears on the display.
REPEAT
• The current track or disc will now be
played repeatedly until you pressÇ.
2 Press REPEAT until the "OFF" mode is
displayed to resume normal playback.
™ The
disappears from the
REPEAT
display.
16
pg 01-28/V55/21-En 16
Below is an example of the OSD message.
VIDEO CD
SINGLE ELAPSED
Adjusting the TV System
PLAY
Before viewing the Video CD, ensure that
Notes:
the set is switched to corresponding PAL or
NTSC system of your TV set (exception – "XX" is the current track.
Multi-system TV) . – "TT" is the total tracks.
– "MM" is in minutes.
• Press and hold VCD for more than 2
– "SS" is in seconds.
seconds to switch between PAL or
NTSC TV system.
When OSD is switched off; there is no
™ After TV system is selected, the set
information indicated on the TV screen.
will automatically switch to the last
TV system setting everytime the VCD
Playing a Video CD with PBC
source is selected.
VCDs with PBC (Play Back Control) will be
Note:
indicated on the display of the set and on
– Before adjusting the TV system, make
your TV screen as soon as they are
sure that there is not MP3-CD disc in
inserted. PBC is a predefined play
disc tray 1 during power up.
sequence stored on the VCD.
1 Switch on the TV, insert a VCD with PBC
OSD - On Screen Display
and press ÉÅ to start playback.
If you insert one or more VCDs/CDs, your
2 MENU appears on the TV screen.
TV screen will serve as an additional
display for messages (e.g. PLAY, STOP), and
If a menu consists of a list of titles you can
information stored on the VCD/CD.
select a sequence directly.
• Press OSD on the remote control
1 Select your choice with the digit keys
repeatedly to switch ON or OFF.
0 - 9 on the remote control. The VCD
starts playing of the selected sequence
When OSD is switched ON; you can see
automatically.
the following display on the TV screen.
2 Press RETURN (
previous menu.
Note:
– If a menu consists of more than one
page, it is possible to go through the
XX/TT MM:SS pages with PREV./NEXT on the set or
remote control.
Switching off PBC
• It is possible to switch off PBC in STOP
mode by pressing the PBC button. Now
this VCD can be treated like a normal
VCD.
™ The TV display will show
< PBC OFF > .
Notes:
– In PBC mode PROGRAM is not active.
– The MENU structure depends on the
program stored on the VCD. Please refer
to the information supplied with the
disc.
Slow
1 Press SLOW on the remote control to
watch a VCD in a slow speed. There are
3 types of slow modes to select.
™ "SLOW 1" , "SLOW 2" or
"SLOW 3" appears on the TV
screen.
2 PressÉ Å again to resume playback at
normal speed.
Note:
) to go back to the – Audio is muted in Slow mode.
6/8/01, 9:11 AM
3139 115 20042