Chain Dialing - AT&T DECT EL51109 User Manual

Telephone operation
Options while on calls

Chain dialing

Use this feature to initiate a dialing sequence from numbers stored in the
directory, caller ID history or redial while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as bank
account numbers or access codes) from the directory, caller ID history or redial
list.
To get to the directory while on a call:
1. Press MENU/
2. Press CID or DIR
3. Press /SELECT to dial the number shown.
MENU
To get to the caller ID history (call log) while on a call:
1. Press MENU/
2. Press CID or DIR
3. Press CID or DIR
4. Press /SELECT to dial the number shown.
MENU
To get to the last number redial while on a call:
Press /REDIAL to show and dial the most recently dialed number. If you
PAUSE
press /REDIAL again within two seconds, the number is not dialed.
PAUSE
NOTES:
1. You cannot edit a directory entry while on a call. For more details about the
directory, see page 20.
2. You cannot copy a caller ID entry into the directory while on a call. For more
details about the caller ID history, see page 26.
3. If you press REDIAL/
call, and you cannot erase the entry. For more details about the redial memory,
see page 16.
4. Press and hold
are on a call.
twice when in idle mode to enter >DIRECTORY.
SELECT
to scroll to the desired number.
.
SELECT
to scroll to >CALL LOG, then press
to scroll to the desired number.
PAUSE
OFF/
CLEAR
while on a call, you can only view the most recent
to exit redial, directory or caller ID history when you
18
/SELECT.
MENU