Telephone operation
Options while on calls
Volume control
While on a call, press
increase the listening volume.
NOTES:
1. Handset and speakerphone volume settings are independent.
2. When the volume reaches the minimum or maximum setting,
you hear two beeps.
Call waiting
If you subscribe to call waiting service with your local telephone service provider,
you hear a beep if someone calls while you are already on a call. Press
/FLASH to put your current call on hold and take the new call. Press
PHONE
/FLASH at any time to switch back and forth between calls.
PHONE
Mute
Use the mute function to turn off the microphone. You can hear the caller, but
the caller does not hear you.
To mute a call:
•
Press MUTE. When mute is on, the handset screen shows
MUTED for a few seconds and the MUTE icon appears
until you turn off mute.
To un-mute a call:
•
Press MUTE again. When mute is off, MICROPHONE ON
appears temporarily on the handset screen.
VOLUME/
to decrease or press
CID
17
VOLUME/
to
DIR
QIPOF!!!1;11;41
NVUFE
MUTE