AT&T DECT EL51109 User Manual page 44

Dect 6.0 cordless telephone with caller id/call waiting
Hide thumbs Also See for DECT EL51109:
Table of Contents

Advertisement

Appendix C
Troubleshooting
I get noise, static,
or weak signals
even when I'm
near the telephone
base.
• If you subscribe to high-speed Internet service (digital
subscriber line - DSL) through your telephone lines,
you must install a DSL filter between the telephone
base and the telephone wall jack (see page 4). The
filter prevents noise and caller ID problems caused by
DSL interference. Please contact your DSL service
provider for more information about DSL filters.
• You may be able to improve the performance of your
cordless phone by installing your new telephone base
as far as possible from any other existing cordless
telephone system that may already be installed.
• Other electronic products can cause interference to
your cordless phone. Try installing your phone as far
away from the following electronic devices as
possible: television sets, VCRs, or other cordless
telephones.
• Do not install this phone near a microwave oven or on
the same electrical outlet. You may experience
decreased performance while the microwave oven is
operating.
• If your phone is plugged in with a modem or a surge
protector, plug the phone (or modem/surge
protector) into a different location. If this doesn't
solve the problem, re-locate your phone or modem
farther apart from one another, or use a different
surge protector.
• Relocate your phone to a higher location. The phone
will likely have better reception when installed in a
high area.
• If the other phones in your home are having the same
problem, the problem is in your wiring or local service.
Contact your local telephone company (charges may
apply).
39

Advertisement

Table of Contents
loading

Table of Contents