Temporary Tone Dialing; Chain Dialing - AT&T EL52513 User Manual

Telephone operation
Options while on calls

Temporary tone dialing

If you have dial-pulse (rotary) dialing service only, you can
temporarily switch from pulse-tone dialing to touch-tone
dialing during a call.
During a call, press TonE .
1.
2. Use the dialing keys to enter the desired number. The
telephone sends touch-tone signals.
3. The telephone automatically returns to pulse dial mode after you end the call.

Chain dialing

While on a call, you can initiate a dialing sequence from numbers stored in
the directory, caller ID log or redial list. Doing this can be useful if you need
to access numbers other than telephone numbers (such as account numbers
or access codes).
To access the directory while on a call:
1. Press mEnU/
/SElECT to choose Directory.
2. Press
mEnU
3. Press or
CID
(0-9) to find the desired entry (see Search by name on
page 36).
/SElECT. The telephone automatically dials
4. Press
mEnU
the displayed number.
To access the caller ID log while on a call:
Press mEnU/
1.
2. Press or
CID
/SElECT.
mEnU
3. Press or
CID
# (pound key) to view other dialing options, if necessary.
See view the dialing options on page 45 for
more details.
4. Press /SElECT. The telephone automatically dials
mEnU
the displayed number.
.
SElECT
to scroll or use the dialing keys
DIR
.
SElECT
to scroll to Caller ID log, then press
DIR
to scroll to the desired entry. Press
DIR
26
PHONE 0:01:30
888-722-7702
ECO
10:30 11/20
PM
Directory
ECO
Charlie Johnson
888-883-2445
ECO
ROBERT BROWN
800-360-4121
ECO
10:30 11/20
PM