Telephone operation
Handset operation
Auto off
Placing the handset in the telephone base automatically ends a call.
Speakerphone information
During a call, press
and normal handset use. Press
NOTES:
1.
If you use the speakerphone during LOW BATTERY mode,
the handset is not lit except for the
2.
The speakerphone uses more power than the normal handset.
If the handset battery becomes very low while you are using
the speakerphone, the call remains in speakerphone mode
until you hang up or the battery becomes depleted. When the
battery is very low, you cannot switch a call from normal
handset use to speakerphone mode.
3.
After installing the battery into the handset, the screen may
show LOW BATTERY. If you use speakerphone at this time,
the battery may become depleted. Follow the instructions in
the Battery installation & charging section on pages 5-6.
Last number redial
To view the recently dialed numbers:
•
To display the most recently called number (up to 30
digits), press REDIAL/
•
To view up to five recently called numbers, press
REDIAL/
PAUSE
REDIAL/
PAUSE
The handset beeps twice at the beginning and at the end of
the list.
Press
OFF/
CLEAR
To redial a number:
•
To dial the displayed number, press
-OR-
•
You can call the most recently called number by pressing
PHONE/FLASH or
While reviewing the redial memory, press DELETE to delete the displayed
number.
SPEAKER to switch between hands-free speakerphone
OFF/
.
PAUSE
. Then press
CID or DIR , or press
repeatedly.
to exit.
SPEAKER, then pressing REDIAL/
to hang up.
CLEAR
SPEAKER button.
PHONE/FLASH or
16
Elapsed time
TQFBLFS!1;11;41
SFEJBM
999.994.3556
SPEAKER.
.
PAUSE