Planet WS-1032P Quick Installation Manual page 9

Step 2. Go to the "AP Search" page and then click "Search" to discover the
managed AP.
Step 3. In the "Select Device" field, check the AP and then click "Apply".
Step 4. Then, you can go to the "AP Management" page to configure the
general setting and designate the pre-defined profiles to the managed AP
without logging on to the AP's web page.
For information about further configuration of the Managed AP by using AP
Managed Switch, refer to the user manual of the AP Managed Switch models.
Step 5. The WS AP controller series must be assigned a gateway in the same
segment network. (default:192.168.1.254)
Figure 4-3 AP Search
Figure 4-4 AP Management
Figure 4-5 IP Configuration setting
9