Configuring IP Address
3. At the "#" prompt, enter the following command and press <Enter> as shown
in Figure 5-5.
WS-1032P# configure terminal
WS-1032P(config)# interface vlan 1
WS-1032P(config-if-vlan)# ip address 192.168.1.101 255.255.255.0
The previous command would apply the following settings for the AP Managed
Switch.
IP Address: 192.168.1.101
Subnet Mask: 255.255.255.0
4. Repeat Step 1 to check if the IP address is changed.
Figure 5-5 IP Address Screen
13