Install The Slide Racks - Cleveland SteamCraft 21CET8 Operation Installation Maintenance Manual

G. INSTALL the SLIDE RACKS
1. Refer to Figure 3-6. Each rack has four loops: two at
the top and two at the bottom.
2. Hold the slide rack so the ends of the hanger loops
are towards the cooking compartment wall, as shown
in Figure 3-6.
3. Slide one rack into the compartment with the hanger
loops on the cooking compartment wall side.
4. Hook the loops over the top and bottom pins.
5. Repeat steps 1. through 4. for the other rack.
Figure 3-5
Typical Drain Layout
16
Figure 3-6
Slide Rack Installed