Table of Contents
Advertisement
2 - ELECTRICAL INSTALLATION
IMPORTANT: The appliance must be installed in accordance with the manufacturer's
instructions. Incorrect installation, for which the manufacturer accepts no
responsibility, may cause damage to persons, animals and property.
The connection of the appliance to earth is mandatory. The manufacturer declines
all responsibility for any inconvenience resulting from the inobservance of this
condition.
Before carrying out any work on the electrical parts of the appliance, the appliance
must be disconnected and locked off from the mains.
DO NOT use the hob if the glass surface is broken or cracked in any way.
Please disconnect the appliance from the mains and call the After-Sales Service.
GENERAL
•
The appliance must be connected to the electrical network verifying that the voltage
corresponds to the value indicated on the specifications plate and that the cables
section of the electrical wiring can bear the load which is indicated on the rating
plate .
•
We recommend that the appliance is connected by a suitably qualified person who
will comply with the current IEE and local regulations .
•
It is recomended that the appliance is connected via a dedicated cooker circuit using
a double pole cooker switch with a rating equal or greater than the total loading of
the cooker, with a minimum opening between the contacts of 3 mm .
•
Alternative connection methods may be available as long as they conform to current
IEE wiring regulations .
•
The power supply cable must not touch the hot parts and must be positioned so that
it does not exceed 50°C at any point .
•
Once the cooker has been installed, the switch must always be easily accessible
within 2 metres .
16
16
- Quick Links:
- Electrical Section
Hide quick links:
Advertisement
Table of Contents
