Cleaning Your Machine - Canon Pixma MP800R User Manual
Photo all-in-one printer
Hide thumbs
Also See for Pixma MP800R:
- Setup manual (78 pages) ,
- Supplementary manual (6 pages) ,
- Quick start manual (39 pages)
Table of Contents
Advertisement
(2) Use [ ] or [ ] to select <Auto head align> and then press [OK].
The confirmation screen is displayed.
Note
Select <Head alignment print> to print the current adjustment values.
(3) Load two sheets of A4- or Letter-sized plain paper in the Auto Sheet Feeder.
(4) Use [ ] or [ ] to select <Yes> and then press [OK].
A pattern is printed and the Print Head is automatically aligned. It takes about five
minutes until printing completes.
Note
The pattern is printed in black and blue.
When Automatic Print Head Alignment Cannot Be Executed Correctly
When automatic Print Head alignment cannot be executed correctly, the message "Auto
head align has failed." is displayed on the LCD.
See
"An Error Message is Displayed on the LCD" on page
Cleaning Your Machine
This section describes the necessary cleaning procedures for your machine.
Caution
Be sure to turn OFF the power and disconnect the power cord before cleaning the
machine.
Do not use tissue paper, paper towels, or similar materials for cleaning. Paper tissue
powders or fine threads may remain inside the machine and cause problems such as a
blocked Print Head and poor printing results. Use a soft cloth to avoid scratching the
components.
Never use volatile liquids such as thinners, benzene, acetone, or any other chemical
cleaner to clean the machine; these can damage the machine's components.
Chapter 11
(2)
(4)
127.
Routine Maintenance
121
Hide quick links:
Advertisement
Chapters
Table of Contents
