Connecting To A Pictbridge Compliant Device - Canon Pixma MP800R User Manual

Connecting to a PictBridge Compliant Device

To connect a PictBridge compliant device to this machine, use the USB cable supplied with the
device.
Caution
Do not connect any equipment other than PictBridge compliant devices, Canon Bubble Jet Direct
compatible digital cameras or optional Bluetooth Units BU-20 to the Direct Print Port of the machine.
If you do so, electric shock, fire, or damage to the device could result.
Note
When printing photos with the digital device connected to the machine, it is advisable to use the AC
adapter supplied with the device. If you use the device battery, be sure to charge it fully.
1
Set up the machine.
Refer to the Setup Guide to set up the machine and make it ready for printing.
Note
The Print Head cannot be aligned using the controls of the digital device. If the Print Head
alignment is not yet performed, execute automatic Print Head alignment, see
Head automatically" on page
2
Turn on the machine.
See "Turning on the Machine" on page
3
Load the paper in the machine.
See "Loading Paper" on page
4
Connect the PictBridge compliant device to the machine.
Note
Depending on the model or brand of your device, you may have to select a print mode
compliant with PictBridge before connecting the device.
You may also have to turn on the device or select Play mode manually after connecting the
device to the machine.
Perform necessary operations according to the instruction manual supplied with the
PictBridge compliant device.
(1) Ensure that the device is turned off.
76 Printing Photographs Directly from a Compliant Device
120.
18.
20.
"Aligning Print
Chapter 5