When You Connect to a Computer Running Windows XP, the Screen
Shows the Warning Message "This device can perform faster" or "High-
SPEED USB Device Plugged into non-High-SPEED USB Hub"
Cause
You connect to a computer that does
not support USB 2.0 Hi-Speed.
Problems Scanning
Scanner won't work
Cause
The machine is not recognized by
the computer.
ScanGear MP won't start
Cause
Scanner driver (ScanGear MP) not
installed.
Chapter 12
Your environment is not fully compatible with USB 2.0.
See
"Printing Speed is Slow / USB 2.0 Hi-Speed Connection Does Not
Work" on page
148.
Restart the computer.
This may enable the computer to recognize the machine.
Set the Setup CD-ROM and install the software.
Action
Action
Action
Troubleshooting
149