Sending Documents
This section explains how to dial a number for faxing.
Using Regular Dialing
When you come to a step that requires dialing a number, you can dial the number with the keys
on the numeric keypad, just like you would when dialing a telephone number. This is called
"regular dialing".
NOTE
To make dialing easier, register frequently used numbers to the one-touch speed dialing keys or
coded speed dialing codes. (See "Using Speed Dialing", on p. 3-21.)
1
2
1
2
3
4
5
6
7
8
9
0
Place your documents on the machine.
For instructions explaining how to place your documents, see "Setting the
Document on the Machine", on p. 2-2.
DOCUMENT READY
NOTE
You can adjust the resolution, contrast, and document type for scanning. (See "Adjusting
the Scan Settings", on p. 2-4.)
You can also specify a sender's name with [TTI Selector]. (See Chapter 3, "Sending
Documents", in the Facsimile Guide.)
Dial the telephone number using the numeric keys.
NOTE
When entering a number using regular dialing, if you see that you have entered an
incorrect digit, press [Delete] to delete the rightmost digit
You can also use
(Clear) to clear the entire telephone number
C
telephone number again.
If you notice that you made a mistake while the machine is dialing the number, press
(Stop) to return to the Standby mode
enter the correct digit.
start again.
Sending Documents
3
start entering the
3-9