Correcting A Mistake - Canon FAX-L2000IP Quick Reference Manual

3
Enter the next letter, if necessary.
If the next letter you want to enter is under the same key you just pressed,
press [
repeatedly until the letter you want appears.
If the next letter you want to enter is under a different key, just press that key to
move the cursor to the right, and enter the first letter of that group.
For example, if you want to enter the word <Canon>:
Press b until you see an upper case <C>
a lower case <a>. To enter the rest of the word, press f until you see a lower
case <n>
appears
<n> appears.
NOTE
• When you are in the upper or lower case letter Entry mode, you can also enter symbols.
Press
• To enter a space, press [Space].
4
To complete entering the name for registration, press [OK].
OK
DATA ENTRY OK

Correcting a Mistake

1
Press [ ] or [ ] to move the cursor to the left or right to position
OK
it under the incorrect letter
dialing panels
NOTE
• Press
Delete
] to move the cursor to the right one space. Then, press the key
press [ ] to move the cursor to the right
press [ ] to move the cursor to the right
(#) repeatedly until you see the desired symbol.
:a
press [Delete]
(Clear) to delete the entire entry
C
Using the Menus and Operation Panel Keys
press press b until you see
press f until an <o>
press f again until an
open all three one-touch speed
enter the correct letter.
start again.
1
1-27