Table of Contents
Advertisement
Diverse 4016 Executive ~ 7th Edition ~ 21st September ~ 4080
Handset does not ring.
You cannot dial external numbers.
Your cannot hear your caller.
The incoming caller's number is
not displayed even though you
have Caller Display.
You keep hearing the error beep
(a descending tone)
The answering machine
announces "PIN is incorrect"
during remote access.
The answering machine will
not record.
Answering machine messages
do not have the date and time
attached.
64
The handset ringer may be
switched off.
Call barring may be set.
The LEFT navigation button has
been pressed and the microphone
is muted.
The caller's number has been
withheld.
You have pressed the wrong
button in a sequence.
The PIN entered is the wrong
one or it is still set to 0000.
The memory is full.
Date/time has not been set.
Hold down
to switch the ringer
back on.
Switch off call barring (see page 45).
Press
to switch the
microphone back on.
Caller has to allow their number to
be sent.
Check the prompts in the display
or refer to instructions in the
user guide.
Re-enter the base station PIN or set
a PIN other than 0000.
Delete old messages. Play back and
delete new messages.
Set the date and time (see page 14).
Advertisement
Table of Contents
