BT 4016 User Manual page 62

Diverse 4016 Executive ~ 7th Edition ~ 21st September ~ 4080
If all internal numbers have been
assigned then the internal number 6
will be re-assigned.
You can change the internal handset
number if you wish, see page 44.
To manually register a Diverse
4000 Executive handset to
another base station
If you want to register your
handset to another base station
you will need to manually
register it.
On the handset to be registered:
Press the Menu options button.
Menu
Press the DOWN navigation
button until the display shows
H/Set Settings .
Press the OK options button.
OK
Press the DOWN navigation
button until the display shows
Register H/Set .
Press the OK options button.
OK
Press the DOWN navigation
button to display the Base
Station number you want
Base 1 , Base 2 , Base 3 , Base 4 .
60
Note
For example, if the handset is
already registered at Base 1,
you could set your base as
Base 2.
Press the OK options button.
OK
Enter the base station PIN
(original setting =
Press the OK options button.
OK
Display shows
Procedure Base X .
If the base station is a Diverse
4016 or 4016 base press the
PAGE button located
underneath the base station
for approximately one second.
After approximately one
minute the handset will display
its internal number. The
handset is now registered and
the handset display will return
to the idle screen.
If the base is not a 4016 or 4016
you will need to follow the
user guide for the base station
you are registering the 4000
handset to.
Press the RED PHONE button
until you reach the idle display.
0000 )
Registr.