BT 4016 User Manual page 46

Diverse 4016 Executive ~ 7th Edition ~ 21st September ~ 4080
To switch keyguard on and off
You can lock the keypad so that
it cannot be used accidentally
while carrying it around.
Press and hold the
When the keyguard is
switched on, the display will
show the
Press and hold the
to switch the keyguard off.
To give a handset a name
rather than a number
The handsets when registered
are assigned numbers e.g.
1 . You can give the handset a
name instead of a number to
match the user or location,
e.g. Anne or Office .
The name can be up to 10
characters long.
Press the LEFT navigation
button to display the list of
handsets.
Press the UP or DOWN
navigation button to select the
handset you you want to change
the name or number of.
Press the Edit options button.
Edit
Enter the name you want.
Press the Save options button
Save
to confirm.
Press the RED PHONE button
until you reach the idle display.
44
# button.
icon.
#
button
INT
To change the internal number
of a handset
Your handsets are automatically
assigned internal numbers
between 1-6. You can change
these numbers.
Press the LEFT navigation
button to display the list of
handsets.
Press the UP or DOWN
navigation button to select the
handset you want.
Press the Edit options button.
Edit
Enter an available number.
If the number is already
assigned to another handset
you hear a beep. Select another
number.
If required, press the UP or
DOWN navigation button to
select another handset and use
the Keypad to change the
number.
Press the OK options button
OK
to confirm.
Press the RED PHONE button
until you reach the idle display.