Room Monitor - BT 4016 User Manual

Diverse 4016 Executive ~ 7th Edition ~ 21st September ~ 4080
To switch Walk and Talk
mode on and off
Press the Menu options button.
Menu
Press the DOWN navigation
button to until the display shows
Additional Features .
OK Press the OK options button.
Press the DOWN navigation
button until the display shows
Walk and Talk .
Press the OK options button to
OK
switch Walk and Talk on.
Or
Press the Off options button to
Off
switch Walk and Talk off.
To use Walk and Talk
Walk and Talk mode must be
switched on for at least two
handsets.
Call a handset:
Press the Call options button.
Call
The called handset receives a
Walk and Talk message on the
display.
Answer a call:
Press the GREEN PHONE
button to take the call.

Room monitor

You can use a handset as a room monitor.
If a certain noise level is reached, the
handset will automatically dial an
internal or external number which you
have set.
Note
To use the room monitor:
The answering machine must be
switched off.
Make sure that the call bar has not
been set.
The battery power is used more quickly.
Any incoming calls on the handset
which is being used as the room
monitor will not ring at the handset.
The keypad and display are not backlit.
37