Code Alarm PROFESSIONAL Series Installation Manual page 6

Security and keyless entry
Hide thumbs Also See for PROFESSIONAL Series:
Table of Contents

Advertisement

4
BROWN/BLACK
Refer to the Door Lock Section on page 11 of this guide.
5
VIOLET/BLACK
Refer to the Door Lock Section on page 11 of this guide.
6
WHITE/BLACK
Refer to the Door Lock Section on page 11 of this guide.
7
GREEN/BLACK
Refer to the Door Lock Section on page 11 of this guide.
8
WHITE
9
WHITE/RED
10
WHITE
Locate the parking light output wire at the vehicle's light switch.
Verification: This wire registers positive voltage when the parking lights
are turned on.
Positive switching Parking Lights:
Connect the WHITE/RED wire to a 15 Amp max fused battery source.
Connect the WHITE wire to the parking light output wire.
Negative switching Parking Lights:
Connect the WHITE/RED wire to a good chassis ground.
Connect the WHITE wire to the parking light output wire.
6
UNLOCK SWITCH ( 87A )
UNLOCK POLARITY ( 87 )
LOCK SWITCH ( 87A )
LOCK MOTOR ( 30 )
PARKING LIGHT OUTPUT
PARKING LIGHT INPUT
PARKING LIGHT OUTPUT
ca1155 rev B

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ca1155

Table of Contents