Clock - Sony RDR-HX910 Operating Instructions Manual

2
Select the programme position for which you
want to set or change the TV guide page by
pressing PROG +/–.
• The TV guide page numbers (Example:
P301) appear automatically when the
recorder detects them.
Settings - TV Guide Page
Sun
Mon
Tue
Wed
Thu
Fri
Sat
• If no page numbers are detected (P000), you
have to set the appropriate TV guide page
number manually.
Settings - TV Guide Page
Sun
Mon
Tue
Wed
Thu
Fri
Sat
3
Select the TV guide page number you want to
modify, and press ENTER.
Settings - TV Guide Page
Sun P P 000 0
Mon P 000
Tue P 000
Wed P 000
Thu P 000
Fri P 000
Sat P 000
4 Press the number buttons or </M/m/, to
enter the TV guide page number, and press
ENTER to confirm the setting.
• If you make a mistake, press CLEAR to re-
enter the correct number.
To set or change another TV guide page
number, repeat steps 3 and 4 above.
z Hint
To view Teletext information on your TV screen during
a broadcast, switch to your TV's tuner by pressing
t TV/VIDEO (page 18).
Prog. 4
P 301
P 302
P 303
P 304
P 305
P 306
P 307
Prog. 4
P 000
P 000
P 000
P 000
P 000
P 000
P 000
Prog. 4
0 0
b
Notes
• In step 4 above, enter "000" if you do not want to use
the TV guide page number for automatic labelling. The
recorder will instead store a default title name
(programme position, start time - stop time).
• Refer to the Teletext information on your TV screen to
obtain the TV guide page number with programme
titles and their start times.
• If the Teletext TV guide has a page which always
shows the programmes for the current day, this page
should be input for all days.
• If you start recording more than three minutes before
the programme is scheduled to start, the correct label
information may not be transferred.
• Note that this function may not work correctly with
programmes broadcast from some stations.
• If the broadcast system updates the Teletext
information at the moment recording starts, the title
label may not correspond to the recorded programme.
In this case, you may have to manually enter the correct
title (page 33).

Clock

Auto Adjust (Auto Clock Set)
This function cannot be used in your area.
Present Time (Manual Clock Set)
Set the clock manually.
1
Select "Clock" in "Settings," and press
ENTER.
2
Select "Present Time," and press ENTER.
Clock - Present Time
Set the time and date manually.
1
Sat 1
3
Press M/m to set the day, and press ,.
Set the month, year, hour, and minutes in
sequence. Press </, to select the item to be
set, then press M/m to set the numbers. The
day of the week is set automatically.
To change the numbers, press < to return to
the item to be changed, and press M/m.
4
Press ENTER to start the clock.
z Hint
To change the numbers in step 3, press < to return to the
item to be changed, and select the numbers by pressing
M/m.
2005 0 00 :
,continued
83