Step 5: Connecting The Power Cord (Mains Lead) - Sony RDR-HX910 Operating Instructions Manual

z Hint
For correct speaker location, see the operating
instructions supplied with the connected components.
b
Notes
• Do not connect your TV's audio output jacks to the
LINE IN (R-AUDIO-L) jacks at the same time. This
will cause unwanted noise to come from your TV's
speakers.
• In the connection A, do not connect the LINE IN (R-
AUDIO-L) and LINE OUT (R-AUDIO-L) jacks to
your TV's audio output jacks at the same time. This
will cause unwanted noise to come from your TV's
speakers.
• In the connection B, after you have completed the
connection, make the appropriate settings under
"Audio Connection" in "Easy Setup" (page 21).
Otherwise, no sound or a loud noise will come from
your speakers.
• With the connection B, the surround sound effects of
this recorder cannot be used.
*1
Manufactured under license from Dolby Laboratories.
"Dolby," and the double-D symbol are trademarks of
Dolby Laboratories.
*2
"DTS" and "DTS Digital Out" are trademarks of
Digital Theater Systems, Inc.
Step 5: Connecting the
Power Cord (Mains Lead)
Connect the supplied power cord (mains lead) to
the AC IN terminal of the recorder. Then plug the
recorder and TV power cords (mains leads) into
the mains. After you connect the power cord
(mains lead), you must wait for a short while
before operating the recorder. You can
operate the recorder once the front panel display
lights up and the recorder enters standby mode.
If you connect additional equipment to this
recorder (page 22), be sure to connect the power
cord (mains lead) after all connections are
complete.
~
AC IN
1
to AC IN
2
to mains
17