Audio Settings (Audio) - Sony RDR-HX910 Operating Instructions Manual

Audio Settings (Audio)

The "Audio" setup allows you to adjust the sound
according to the playback and connection
conditions.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Audio," and press ENTER.
The "Audio" setup appears with the following
options. The default settings are underlined.
SETUP
Settings Audio ATT :
Audio DRC :
Video
Downmix :
Audio
Audio Connection
Features
Options
Easy Setup
Audio ATT (attenuation)
If the playback sound is distorted, set this item to
"On." The recorder reduces the audio output level.
This function affects the output of the following
jacks:
– LINE OUT R-AUDIO-L jacks
On
Select this when the playback
sound from the speakers is
distorted.
Off Normally select this position.
86
Off
Standard
Dolby Surround
Audio DRC (Dynamic Range Control) (DVDs
only)
Makes the sound clear when the volume is turned
down when playing a DVD that conforms to
"Audio DRC." This affects the output from the
following jacks:
– LINE OUT R-AUDIO-L jacks
– DIGITAL OUT (OPTICAL or COAXIAL) jack
only when "Dolby Digital" is set to "D-PCM"
(page 87).
Standard Normally select this position.
TV Mode Makes low sounds clear even if
you turn the volume down.
Wide Gives you the feeling of being at a
Range live performance.
Downmix (DVDs only)
Switches the method for mixing down to two
channels when you play a DVD which has rear
sound elements (channels) or is recorded in Dolby
Digital format. For details on the rear signal
components, see "4. Displaying the Playing Time
and Play Information" on page 31. This function
affects the output of the following jacks:
– LINE OUT R-AUDIO-L jacks
– DIGITAL OUT (OPTICAL or COAXIAL) jack
when "Dolby Digital" is set to "D-PCM"
(page 87).
Dolby Normally select this position.
Surround Multi-channel audio signals are
output to two channels for
enjoying surround sounds.
Normal
Multi-channel audio signals are
downmixed to two channels for
use with your stereo.