Sony RDR-HX910 Operating Instructions Manual page 89

3
Select "Standard," and press , or ENTER.
The selection items for "Standard" are
displayed.
Features - Parental Control
Level :
Standard :
Password
4
Select a geographic area as the playback
limitation level, and press ENTER.
The area is selected.
• When you select "Others," press the number
buttons to select and enter an area code in
the table (page 108). Then select "OK" and
press ENTER.
5
Select "Level," and press ENTER.
The selection items for "Level" are displayed.
Features - Parental Control
Level :
Standard :
Password
The lower the value, the stricter the limitation.
Discs rated higher than the selected level will
be restricted.
6
Select the level, and press ENTER.
The Parental Control setting is complete.
To cancel the Parental Control setting for the
disc, set "Level" to "Off" in step 6.
To change the password, select "Password" in
step 3, and press ENTER. When the display
for registering a password appears, enter a
new four-digit password using the number
buttons, then select "OK" and press ENTER.
b
Notes
• If you forget your password, you will have to reset it by
selecting "Parental Control" of "Factory Setup" in
"Options" setup (page 91).
• When you play discs which do not have the Parental
Control function, playback cannot be limited on this
recorder.
• Depending on the disc, you may be asked to change the
Parental Control level while playing the disc. In this
case, enter your password, then change the level.
Off
USA
USA
Others
Off
8
7
6
5
4
One Touch Dubbing
Displays the following options for the One Touch
Dub function.
Finalize Disc (for all recordable discs except
DVD-RW in VR mode)
Selects whether or not to finalize the disc
automatically following One Touch Dubbing
(page 77).
Auto Automatically finalizes the disc
following One Touch Dubbing.
Manual
Allows you to finalize the disc
manually.
Synchro Rec
Selects the recording destination used for
Synchro-Recording (page 46).
Record to Records to the HDD.
HDD
Record to Records to DVDs.
DVD
HQ Setting (HDD only)
Selects the HQ mode used for recording on the
HDD (page 37).
HQ+ Records in higher quality
(approximate 15 Mbps).
HQ Records in the standard HQ mode.
Colour System
Selects the colour system when playing VIDEO
CDs (including Super VIDEO CDs).
PAL Plays a disc in PAL colour system.
NTSC Plays a disc in NTSC colour
system.
Screen Saver
The screen saver image appears when you do not
use the recorder for more than 10 minutes while an
on-screen display, such as the System Menu, is
displayed on your TV screen. The screen saver
image helps prevent your display device from
becoming damaged (ghosting).
On Turns on the screen saver function.
Off
Turns off the function.
89