Automatically Erasing Old Titles (Auto Title Erase) - Sony RDR-HX910 Operating Instructions Manual

"Check Overlap": Checks for overlapped
settings.
Check Overlap
These timer settings overlap.
Fri 29.10 20:30-21:30
Fri 29.10 21:00-22:00
Close
Select "Close" to return to the Timer List.
To change or cancel the setting, repeat steps 2
and 3 above.
When the timer settings overlap
The programme that starts first has priority and the
second programme starts recording only after the
first programme has finished.
7:00 8:00
A
will be cut off
When the recordings start at the same time
The programme that is set last has priority. In this
example, timer setting B is set after A, so the first
part of timer setting A will not be recorded.
7:00 8:00
A
B
When the end time of one recording and the
start time of another are the same
After finishing the previous recording, the other
recording may be delayed.
7:00
A
DEF DVD SP
GHI DVD SLP
9:00 10:00
B
9:00 10:00
9:00 10:00
B
To scroll the list display by page (Page mode)
Press while the list display is turned on.
/
Each time you press
List changes to the previous/next page of timer
settings.
To turn off the Timer List
Press TIMER LIST or O RETURN.
z Hint
While recording, you cannot modify the timer setting for
the current recording, but you can extend the recording
duration of the recording time (page 40).
b
Notes
• Even if the timer is set, timer recordings cannot be
made while recording a programme that has priority.
• Even if the timer is set for the same daily or weekly
programme, the timer recording cannot be made if it
overlaps with a programme that has priority. "
appear next to the overlapped setting in the Timer List.
Check the priority order of the settings.
Automatically erasing old titles
(Auto Title Erase)
HDD
If there is not enough space for a timer recording,
the recorder automatically erases old titles
recorded on the HDD. The oldest, played title is
erased. The protected titles are not erased.
1
Press TIMER LIST.
The Timer List appears.
2
Press TOOLS to select "Auto Title Erase,"
and press ENTER.
3
Select "On," and press ENTER.
The default setting is "Off."
, the entire Timer
/
" will
45