Unpacking/Installation; Introduction; Unpacking Instructions - Henny Penny KVE-071 Operator's Manual

SECTION 2: UNPACKING / INSTALLATION
2-1

INTRODUCTION

• The wrong installation and maintenance will cause
the loss of equipment function and personal injury.
Please read the manual carefully before installing,
operating and maintaining.
• This manual is not suitable for people: Defect in
physical, sensory or intellectual, or lacking in
experience, knowledge (including children).
2-2
UNPACKING
INSTRUCTIONS
Figure 1
July 2014
This section provides the installation and unpacking instructions for the
Henny Penny KFC, KVE fryer. Installation of this unit should be
performed only by a qualified service technician.
Do not puncture the fryer with any objects such as
drills or screws as com-ponent damage or electrical
shock could result.
Any shipping damage should be noted in the presence of the delivery agent and
signed prior to his or her departure.
1.
Cut and remove the metal bands from the carton.
2.
Remove the carton lid and lift the main carton off the fryer.
3.
Remove corner packing supports (4).
4.
Cut the stretch film from around the carrier/rack box and remove it
from the top of the fryer lid.
5.
Cut and remove the metal bands holding the fryer to the pallet.
•
Do not remove shipping brace from right side of fryer until unit is
in final location as damage to fryer could result.
• Remove filter drain pan from fryer before removing fryer from
pallet or damage to the unit could result. Figure 1.
6.
Remove the fryer from the pallet.
Take care when moving the fryer to prevent personal injury. The
fryer weighs approximately 600 lbs. (272 kg) to 800 lbs. (363 kg).
4