Messages On The Display - Sony VPL-CX76 Operating Instructions Manual

Symptom
The computer cannot access
the Web page of the projector.
The mouse pointer displayed
on the projector is different
from that of the computer.
When the computer is
connected to the projector, the
mouse moves more slowly.

Messages on the Display

Message
Now searching LAN
Module.
Waiting until the IP
address is set.
Cause and Remedy
• The projector is not displayed in the main window of
Projector Station for Air Shot Version 2.
c See "The computer is not displayed in the PC list.
(Projector)" on page 27.
• The browser of the computer is set to "Access the Internet
using a proxy server".
c Set to "Access the Internet without using a proxy server".
• The version of the browser is old.
c Use Internet Explorer version 5.0 or higher.
• [Track mouse shape] in the [Option Setting] - [Connection
Setting]-[Advanced] is not checked.
c Check [Track mouse shape].
Note
The shape of the mouse on the projector is displayed in black and
white.
• The computer is logged on with other than administrator
privileges (Windows XP/2000 only).
c The mouse moves slowly when the computer is logged on
with other than administrator privileges.
• In the [Option Setting]-[Connection Setting] -[Advanced],
[Capture image with video acceralator "off"] is not checked.
c Check [Capture image with video acceralator "off"].
c Even when the computer, OS and wireless LAN device of
the recommended system are used, the mouse may move
slowly.
PC: Message displayed on the computer
PJ: Message displayed on the projector
PC PJ Cause and Remedy
a • The connectable LAN module within the PC is being
searched according to the priorities of the LAN modules
specified in the [Option Setting] window.
c If the message persists, check and set the LAN module
to be used for the Air Shot Version 2 in the [Option
Setting] window.
a • The Air Shot Version 2 is waiting for the IP address to
be set for the LAN module.
c If this message persists, check the wireless and network
settings for the LAN module you use. If the
Auto(DHCP) is selected, it may take few minutes to set
the IP address.
29
Others