Sony VPL-CX76 Operating Instructions Manual page 25

Maintenance Report
Lamp Reminder: Select this check box and
enter the limit for the number of hours
the projector lamp is to be used in the
text box. This information will be used
to send e-mail informing you that
replacement is required for the projector
lamp when the preset time has been
reached. You can specify a time between
1 and 9999 hours.
Maintenance Reminder: Select this check
box and enter the hours of use before
maintenance is required for the projector
in the text box. You can specify a time
between 1 and 99999 hours.
The elapsed time is displayed in the
Elapsed Hours text box. Selecting the
RESET and clicking "Apply" will reset
the elapsed time to zero.
x Address field
E-mail Address
Enter the e-mail addresses to which you
want the e-mail messages to be sent in each
text box. The projector allows you to send e-
mail to 4 different addresses. You can enter
up to 64 characters for each address.
Report Timing
Regular: Select this check box to arrange
the sending of the Regular Report.
Maintenance: Select this check box to
arrange the sending of an e-mail
message that informs you of the number
of hours the projector lamp has been
used and the time when maintenance is
required for the projector.
Error: Select this check box to arrange the
sending of an error report if any problem
occurs with the projector.
Notes
• Even if days are specified in the Report
Timing field, you still must select the
Regular check box to receive the Regular
Report. If the day preset in "Every Month on
Day" does not exist in the month, you will
receive the e-mail message on the last day of
the month.
• You cannot specify the day of the week or
day of the month if "Every Week on Days"
or "Every Month on Day" is not selected.
x Mail Form field
Select the e-mail message type from
"Standard" or "Simple."
x Mail Account field
Mail Address
Type the appropriate e-mail address.
You can enter up to 64 characters.
Outgoing Mail Server (SMTP)
Type the address of the SMTP server.
You can enter up to 64 characters.
Requires Authentication
Select this check box when the
authentication is required for sending an
e-mail.
Requires the use of POP Authentication
before send e-mail (POP before
SMTP): Select this check box to arrange
for POP authentication to be performed
before connecting to the SMTP server.
Incoming Mail Server (POP3): Type the
address of the POP3 server.
Account Name: Type the mail account.
Password: Type the mail password.
SMTP Authentication: Select this check
box to arrange for SMTP Authentication
to be performed before connecting the
SMTP server.
Account Name: Type the mail account.
Password: Type the mail password.
Send test mail: Select the Send check box,
then click "Apply" to send an e-mail
message as a test to confirm whether it is
sent to the specified addresses.
Notes
If the following items have not been set or are
incorrectly set, an error message appears and
the test e-mail message is disabled:
• Address in the Address field.
• "Mail Address" and "Outgoing Mail Server
(SMTP)" in the Mail Account field.
For details on the mail settings, consult your
network administrator.
x Check the contents of the mail
message
The contents of the e-mail message to be
sent appear.
Setting/Operating via Web
25