Sony VPL-CX76 Operating Instructions Manual page 16

Items
Wireless Network
Network Mode*
Network Name(SSID)*
Network Authentication*
Data Encryption*
Key*
Channel
16
Wireless Connection
Functions
Set in the [Wireless Network] window: [Network Mode],
[Network Name(SSID)], [Network Authentication], [Data
Encryption], [Key], and [Channel].
Select [Ad-hoc(Peer-to-peer)] or [Wireless Access Point]
• Ad-hoc(Peer-to-peer): for wireless LAN connection
without the access point
• Wireless Access Point: for wireless LAN connection with
the access point
Enter the same network name as that of the connected
computer or access point. A maximum of 32 characters/
numbers can be entered.
Select the network authentication system from among
[Open], [Shared], [WPA], and [WPA-PSK].
Select the data encryption system from among [WEP] or
[TKIP]. If the data encryption is not used, select [Disable].
When WEP is used for [Data Encryption], enter the WEP
key.
Enter the same key as that of the computer or access point.
The number of the characters/figures
• In case 64(40)bit ASCII: 5 characters/numbers/symbols
• In case 128(104)bit ASCII: 13 characters/numbers/
symbols
• In case 64(40)bit HEX: 10 numbers from 0 to 9/characters
from a to f
• In case 128(104)bit HEX: 26 numbers from 0 to 9/
characters from a to f
Note
When [64(40)bit ASCII] or [128(104)bit ASCII] is selected, the
capital and small letters are discriminated.
When WPA-PSK is used for [Network Authentication],
enter the key. Enter the same key as that of the access point.
The number of the characters/figures
• In case ASCII: 8 to 63 characters/numbers/symbols
• In case HEX: 64 numbers from 0 to 9/characters from a to
f
When [Ad-hoc(Peer-to-peer)] is selected in [Network
Mode], you can select from 1 to 11.
When [Wireless Access Point] is selected in [Network
Mode], [Auto] is selected automatically.
Notes
• If the USB wireless LAN module is connected to the computer,
remove it before setting.
• You may not be able to use some channel according to the
country/region.