Sony VPL-CX76 Operating Instructions Manual page 28

Air shot version 2
Hide thumbs Also See for VPL-CX76:
Table of Contents

Advertisement

Symptom
The computer is not displayed
in the PC list. (Projector)
The computer and projector are
connected in the main window
of Projector Station for Air
Shot Version 2 but the image
cannot be projected on the
projector.
The image displayed on the
projector is different from that
of the computer.
The image of one computer
cannot be projected on several
projectors.
28
Others
Cause and Remedy
In Simple Mode
• Simple Mode of the projector or computer (Projector Station
for Air Shot Version 2) is not set to [On].
c Set Simple Mode to [On].
• [Connected Projector] of the computer is not set to the
projector you want to connect.
c Add or select the projector to be connected by using
[Change Projector] of the computer.
In Manual Mode
• The wireless and network settings of the projector or
computer are not set correctly.
c Check that the Network settings are the same as those of the
connected equipment.
• The projector is set to a picture muting.
c Press the PIC MUTING key on the remote commander to
release the muting.
• INPUT C (VPL-CX86) or INPUT B (VPL-CX76) is not
selected on the projector.
c Press the AIR SHOT key on the remote commander or
select INPUT C (VPL-CX86) or INPUT B (VPL-CX76)
using the INPUT button.
• [Memory Stick] is selected in INPUT C (VPL-CX86) or
INPUT B (VPL-CX76).
c Press the AIR SHOT key on the remote commander.
• The following application software or screen saver may not
be transported correctly.
– Application software that uses DirectX
– Application software that plays back a movie
– Microsoft Office assistant
– Microsoft IME tool bar
– Tool tip displayed by mouse over
• [Set PC desktop to Projector resolution] in the [Option
Setting] - [Connection Setting] is unchecked and the image
of the computer is displayed in a higher resolution than the
XGA.
c An image on the projector is deteriorated when the
computer is set to a higher resolution than the XGA.
• Simple Mode is selected.
c Set the projector and computer to Manual Mode and set the
network and wireless settings.
Note
Even when the computer, OS and wireless LAN device of the
recommended system are used, several computers may not be
connected.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vpl-cx86

Table of Contents