Sony VPL-CX76 Operating Instructions Manual page 15

x Displaying the mode status
When you select [Status] from the action menu, the status of the mode being used is displayed.
The status of each item appears in the right pane of the window.
Items
Internet Protocol(IP)
Wireless Network
Connection Log
Card Information
Close
x Changing the settings
When you select [Setup] from the action menu, the [Network Setting] window of the selected
mode is displayed, where [Internet Protocol(IP)], [Wireless Network], and [802.1x
Authentication] settings can be changed. Select the desired item and press the ENTER (or
right) key to activate its setting items. To input the desired value for the items, press the ENTER
(or right) key. You can return to the setting menu with the ENTER (or left) key. Click [OK] to
save the settings and return to the initial display of the Air Shot 2 setting menu. If you select
[Cancel], the settings will not be saved and the initial display of the Air Shot 2 appears.
*: Disabled in Simple Mode
Items
Internet Protocol(IP)*
IP Address Setting
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Display contents
Displays [IP Address Setting (Manual/Auto)], [IP Address],
[Subnet Mask], [Default Gateway], [Primary DNS], [Secondary
DNS], [DHCP Server], and [Lease Obtained]/[Lease Expires].
Displays [Network Mode], [Network Name(SSID)], [Channel],
and [Received Level] (1% to 100%).
Displays the [Connection Log], [Root Certificate], and [Client
Certificate].
Displays the [Manufacture], [Card Name], and [Wireless
Standard] (802.11b, 802.11b/g), [MAC Address], [WPA Support]
of the wireless LAN card being used.
Closes the [Network Status] window.
Functions
Specify the [Internet Protocol(IP)] settings: [IP Address
Setting (Manual/Auto)], [IP Address], [Subnet Mask],
[Default Gateway], [Primary DNS], [Secondary DNS].
Select [Auto(DHCP)] or [Manual].When the [Manual] is
selected, set [IP Address], [Subnet Mask] and [Default
Gateway].
Set the IP address for the projector.
(1.0.0.0~223.255.255.255)
Set the subnet mask for the projector.
(0.0.0.0~255.255.255.255)
Set the default gateway for the projector.
(1.0.0.0 ~223.255.255.255)
Set the primary DNS server. (1.0.0.0~223.255.255.255)
Set the secondary DNS server. (1.0.0.0~223.255.255.255)
Wireless Connection
15