Solutions When The Image Is Fuzzy Or Blurry - Epson LS11000 User Manual

• If you connected an extension power cable, try projecting without it to see if it caused interference in
the signal.
• If you connected an A/V system that does not support eARC/ARC to the HDMI2 (eARC/ARC) port, the
image may be distorted.
Parent topic:
Related references
Input Signal Settings - Signal I/O Menu
Image Quality Settings - Image Menu
Installation Settings - Installation Menu
Related tasks
Adjusting Image Sharpness

Solutions When the Image is Fuzzy or Blurry

If the projected image is fuzzy or blurry, try the following solutions:
• Adjust the image focus.
• Clean the projector lens.
• Check the lens for condensation.
Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the
projector warm up to room temperature before using it.
• Position the projector close enough to the screen, and directly in front of it.
• Adjust the Sharpness setting to improve image quality.
• If you are projecting from a computer, adjust the computer's resolution to match the projector's native
resolution, if possible.
Parent topic:
Related concepts
Projector Placement
Related references
Image Quality Settings - Image Menu
Related tasks
Focusing the Image with the Lens Button
Solving Image or Sound Problems
Solving Image or Sound Problems
135